Built to Support What Comes Next

Custom-milled timbers and structural beams for construction projects in East Texas

When you need heavy timbers or structural beams milled to exact specifications in Jacksonville, Rusk, Bullard or a surrounding area, you want wood cut for both strength and appearance. Whether the beams will remain visible in your ceiling or support a covered porch, every dimension and cut matters. Trestles LLC mills timbers sized to meet the structural demands of your project while preserving the natural character of the wood.


Each timber is milled based on your structural or aesthetic requirements. You provide the dimensions, and the lumber is cut to fit your design. These beams work well in exposed beam layouts, barn construction, porch framing, and custom residential builds. The milling process produces clean, accurate cuts that allow for dependable installation and long-term performance under load.


If your project requires custom-sized structural timbers, reach out to discuss sizing and availability.

What Changes Between Raw Logs and Finished Beams

The milling process starts with selecting logs that meet the structural grade needed for your build. The wood is squared and cut to your specified thickness, width, and length. You receive beams ready to install, with surfaces that can be left natural or finished depending on whether they will be seen. Each cut is made with attention to grain direction and structural integrity.


Once installed, you will notice the beams sit flush and stable. Exposed timbers add visual weight to a room and often become a focal point. The wood remains dimensionally consistent because it was cut with construction tolerances in mind. These beams hold their shape under typical indoor and covered outdoor conditions.


The service covers milling and sizing but does not include delivery, installation, or finishing. If you are working with an architect or builder, bring dimensions and load requirements so the timbers can be cut accordingly. Larger projects may require lead time depending on log availability and drying schedules.

Questions That Come Up Before You Order

Most people ordering custom timbers want to know how sizing works, what species are available, and how long the process takes. These questions help clarify what to expect before the milling begins.

What sizes can you mill for structural timbers?
You can specify thickness, width, and length based on your project's structural or design needs. Common dimensions include six-by-six, eight-by-eight, and larger beams, but custom sizing is available depending on the log stock.
How do I know which wood species to choose?
Your choice depends on whether the beams will be visible and what load they need to carry. Pine and oak are commonly used for structural applications in this region, and each species offers different grain patterns and working characteristics.
When should I place an order for a construction project?
You should order as early as possible, especially if your beams need to be kiln dried or if you are requesting larger dimensions. Lead time varies depending on log availability and drying requirements.
What condition will the timbers be in when I receive them?
You will receive beams that are square, clean-cut, and ready to install. They may still contain natural moisture unless you request kiln drying. Surface planing or additional finishing is your responsibility unless arranged in advance.
Why would I choose milled timbers over dimensional lumber from a supplier?
Milled timbers allow you to specify exact dimensions and choose wood with visible grain and character. You also have control over species and can work directly with the source rather than selecting from pre-cut inventory.

If your build calls for custom-cut structural beams or exposed timbers, Trestles LLC can mill them to your specifications. Reach out with your project details and dimensions to get started.